Delamination of Ethylene Vinyl Acetate EVA Laminated Glass
By Peter Shin www.helloglass.com
Reason one:
The heating temperature or time is not enough. Please consult about
processing instruction with Ethylene Vinyl Acetate EVA Film
manufacturer.
Reason two:
Ethylene Vinyl Acetate EVA Film is out of self-life, please use
Ethylene Vinyl Acetate EVA Film before expiration. Please confirm with
Ethylene Vinyl Acetate EVA Film manufacturer how long the self-life
is.
Reason three:
The glass surface is not clean, maybe you use some organic water to
wash the glass, make sure the glass surface is clean and dry.
Reason four:
Moisture in the glass surface or Ethylene Vinyl Acetate EVA Film or
environment is too much. Please dry it before lamination. Or prolong
the low-temperature heating time.
Reason five:
If the lamination takes place in some part of laminated glass, maybe
it due to the sweat on the hand of worker, please make sure the worker
is wearing gloves.
Any other situation, please feel free to contact us.
ALL RIGHT RESERVED BY CNC INTERLAYER TECH :
(Product 1. )Ethylene-Vinyl Acetate Ethylene Vinyl Acetate EVA
Interlayer Film for Safety Laminated Glass
(Product 2.) China Solar Ethylene Vinyl Acetate EVA Film for Solar
Panel Encapsulation
(Product 3.) China Smart Switchable Film for Privacy Glass, Smart Glass
(4)Web:www.Ethylene Vinyl Acetate EVAfilms.com / www.cncnext.com
(5)Contact Us: cnc@cncnext.com/ benext77@hotmail.com /benext77@gmail.com
