How to Check the Properties of Laminating Machine?
1) How many beds (layers) inside the machine?
Some glass laminating machine manufacturer produces machine with only
one bed. But some manufacture the machine with two or more laminating
beds. You can choose the kind that is suitable for you.
2) The heating pipe
Where is the heating pipe and how much power of the heating pipe? The
power of the heating pipe usually is 2400 w. If the power of the
heating pipe is too low, than it would takes long time to produce the
laminated glass, and the producing efficiency is low. If the power of
the heating pipe is too high, it's easy to cause the bubbles of the
laminating glass.
3)Is the fan-well-proportioned heating?
This is very important. If the glass laminating machine is the
fan-well-proportioned heating, the temperature of inside the oven is
average, which is best for glass laminating.
4) Silicon bag
The place of the vacuuming hole of the silicon bag and how is the
silicon bag be sealed when laminating.
5) Vacuuming Pump
This part mainly effect whether the bubbles come inside laminating
glass. It is separated in to the water-cooled and oil-cooled. Please
pay attention to whether the vacuuming ability is high enough.
6)The temperature detector
Where is the detector putted? On the surface of the silicon bag or
inside the silicon bag? Usually it is on the surface of the silicon
bag. The place the detector is putted may cause the difference between
the temperature you read and the real temperature of the laminated
glass.
7)Laminating the EVA FILM and PVB FILM at the same machine
Some China glass laminating manufacturer has invented a machine which
can laminated with EVA FILM and PVB FILM.
